ANDERSON THERMAL DEVICES

High intensity infrared heaters for high speed heating. When space allows only a small number of heaters for fast heating.

 

Features:

• Operates up to 1400°F face temperature (not element temperature)

• Wave length 2.6 – 6.0 microns

• Warm up time 2-4 minutes

• Each heater has two rows of stamped element, radiating through Corning Vycor® face plate

• Extruded aluminum case, cast aluminum end caps and mounting clamps

• Operates well in horizontal or vertical position

• Size: 2.75” wide 2.00” deep up to 120″ heated length

• Overall length is 8.5 inches longer than heated length

 

Benefits:

• Extremely efficient and effective. 85% of energy cost is directed at your product

• Reduces drying time drastically, compared with hot air and other infrared heating devices

• With stands shock of water splash at peak temperatures

• Excellent heat transfer even when mounted in the open, sometimes eliminates need for oven enclosures All heaters are repairable

• Built in Thermocouples are available to indicate temperature of radiating heater face and acts as a control point for maintaining constant face temperature. Thermocouple kits for field installation are available.

 

Alternate Electrical hook-ups Possible:

• 3 Phase Wye: power is reduced from 40 to 13.3 watts per inch

• 3 Phase Delta: full power at 40 watts per inch

• Similar design to CH-40 is the VH-40

• Overall length is 1.50″ longer than heated length

• To prolong heater life it is recommended to use temperature controls

• Each heater is supplied with simple mounting and wiring instructions

• Heaters can be reused for different applications

 

Typical Applications:

Teflon Isopar Removal and Sintering – Web Heating or Drying in Plastics, Paper and Coated Products – Paint Baking – Drying of Chemicals and Slurries – Electronic Application